1 files changed, 71 insertions, 0 deletions
diff --git a/libraries/LiquidCrystal/examples/setCursor/setCursor.pde b/libraries/LiquidCrystal/examples/setCursor/setCursor.pde
new file mode 100644
index 0000000..2c1065e
--- /dev/null
+++ b/libraries/LiquidCrystal/examples/setCursor/setCursor.pde
@@ -0,0 +1,71 @@
+/*
+  LiquidCrystal Library - setCursor
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch prints to all the positions of the LCD using the
+ setCursor(0 method:
+ 
+  The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * LCD R/W pin to ground
+ * 10K resistor:
+ * ends to +5V and ground
+ * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ modified 22 Nov 2010
+ by Tom Igoe
+ 
+ This example code is in the public domain.
+ 
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// these constants won't change.  But you can change the size of
+// your LCD using them:
+const int numRows = 2;
+const int numCols = 16;
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+void setup() {
+  // set up the LCD's number of columns and rows: 
+  lcd.begin(numCols,numRows);
+}
+
+void loop() {
+  // loop from ASCII 'a' to ASCII 'z':
+  for (int thisLetter = 'a'; thisLetter <= 'z'; thisLetter++) {
+    // loop over the columns:
+    for (int thisCol = 0; thisCol < numRows; thisCol++) {
+      // loop over the rows:
+      for (int thisRow = 0; thisRow < numCols; thisRow++) {
+        // set the cursor position:
+        lcd.setCursor(thisRow,thisCol);
+        // print the letter:
+        lcd.print(thisLetter, BYTE);
+        delay(200);
+      }
+    }
+  }
+}
+
+