diff options
| author | Jesse Morgan <jesse@jesterpm.net> | 2011-10-20 22:16:19 -0700 |
|---|---|---|
| committer | Jesse Morgan <jesse@jesterpm.net> | 2011-10-20 22:16:19 -0700 |
| commit | fc944ff979dbbd49a57722fe2d1d2acf47312eb4 (patch) | |
| tree | 38cc3a5c5c8f24f55068fc4ffa73d018169fc2df /libraries/SD/examples/Datalogger/Datalogger.pde | |
Inital commit... halfway through the project
Diffstat (limited to 'libraries/SD/examples/Datalogger/Datalogger.pde')
| -rw-r--r-- | libraries/SD/examples/Datalogger/Datalogger.pde | 86 |
1 files changed, 86 insertions, 0 deletions
diff --git a/libraries/SD/examples/Datalogger/Datalogger.pde b/libraries/SD/examples/Datalogger/Datalogger.pde new file mode 100644 index 0000000..a89fbaf --- /dev/null +++ b/libraries/SD/examples/Datalogger/Datalogger.pde @@ -0,0 +1,86 @@ +/*
+ SD card datalogger
+
+ This example shows how to log data from three analog sensors
+ to an SD card using the SD library.
+
+ The circuit:
+ * analog sensors on analog ins 0, 1, and 2
+ * SD card attached to SPI bus as follows:
+ ** MOSI - pin 11
+ ** MISO - pin 12
+ ** CLK - pin 13
+ ** CS - pin 4
+
+ created 24 Nov 2010
+ updated 2 Dec 2010
+ by Tom Igoe
+
+ This example code is in the public domain.
+
+ */
+
+#include <SD.h>
+
+// On the Ethernet Shield, CS is pin 4. Note that even if it's not
+// used as the CS pin, the hardware CS pin (10 on most Arduino boards,
+// 53 on the Mega) must be left as an output or the SD library
+// functions will not work.
+const int chipSelect = 4;
+
+void setup()
+{
+ Serial.begin(9600);
+ Serial.print("Initializing SD card...");
+ // make sure that the default chip select pin is set to
+ // output, even if you don't use it:
+ pinMode(10, OUTPUT);
+
+ // see if the card is present and can be initialized:
+ if (!SD.begin(chipSelect)) {
+ Serial.println("Card failed, or not present");
+ // don't do anything more:
+ return;
+ }
+ Serial.println("card initialized.");
+}
+
+void loop()
+{
+ // make a string for assembling the data to log:
+ String dataString = "";
+
+ // read three sensors and append to the string:
+ for (int analogPin = 0; analogPin < 3; analogPin++) {
+ int sensor = analogRead(analogPin);
+ dataString += String(sensor);
+ if (analogPin < 2) {
+ dataString += ",";
+ }
+ }
+
+ // open the file. note that only one file can be open at a time,
+ // so you have to close this one before opening another.
+ File dataFile = SD.open("datalog.txt", FILE_WRITE);
+
+ // if the file is available, write to it:
+ if (dataFile) {
+ dataFile.println(dataString);
+ dataFile.close();
+ // print to the serial port too:
+ Serial.println(dataString);
+ }
+ // if the file isn't open, pop up an error:
+ else {
+ Serial.println("error opening datalog.txt");
+ }
+}
+
+
+
+
+
+
+
+
+
|