diff options
| author | Jesse Morgan <jesse@jesterpm.net> | 2011-10-20 22:16:19 -0700 |
|---|---|---|
| committer | Jesse Morgan <jesse@jesterpm.net> | 2011-10-20 22:16:19 -0700 |
| commit | fc944ff979dbbd49a57722fe2d1d2acf47312eb4 (patch) | |
| tree | 38cc3a5c5c8f24f55068fc4ffa73d018169fc2df /libraries/Ethernet/examples/ChatServer/ChatServer.pde | |
Inital commit... halfway through the project
Diffstat (limited to 'libraries/Ethernet/examples/ChatServer/ChatServer.pde')
| -rw-r--r-- | libraries/Ethernet/examples/ChatServer/ChatServer.pde | 63 |
1 files changed, 63 insertions, 0 deletions
diff --git a/libraries/Ethernet/examples/ChatServer/ChatServer.pde b/libraries/Ethernet/examples/ChatServer/ChatServer.pde new file mode 100644 index 0000000..7631e73 --- /dev/null +++ b/libraries/Ethernet/examples/ChatServer/ChatServer.pde @@ -0,0 +1,63 @@ +/*
+ Chat Server
+
+ A simple server that distributes any incoming messages to all
+ connected clients. To use telnet to your device's IP address and type.
+ You can see the client's input in the serial monitor as well.
+ Using an Arduino Wiznet Ethernet shield.
+
+ Circuit:
+ * Ethernet shield attached to pins 10, 11, 12, 13
+ * Analog inputs attached to pins A0 through A5 (optional)
+
+ created 18 Dec 2009
+ by David A. Mellis
+ modified 10 August 2010
+ by Tom Igoe
+
+ */
+
+#include <SPI.h>
+#include <Ethernet.h>
+
+// Enter a MAC address and IP address for your controller below.
+// The IP address will be dependent on your local network.
+// gateway and subnet are optional:
+byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
+byte ip[] = { 192,168,1, 177 };
+byte gateway[] = { 192,168,1, 1 };
+byte subnet[] = { 255, 255, 0, 0 };
+
+// telnet defaults to port 23
+Server server(23);
+boolean gotAMessage = false; // whether or not you got a message from the client yet
+
+void setup() {
+ // initialize the ethernet device
+ Ethernet.begin(mac, ip, gateway, subnet);
+ // start listening for clients
+ server.begin();
+ // open the serial port
+ Serial.begin(9600);
+}
+
+void loop() {
+ // wait for a new client:
+ Client client = server.available();
+
+ // when the client sends the first byte, say hello:
+ if (client) {
+ if (!gotAMessage) {
+ Serial.println("We have a new client");
+ client.println("Hello, client!");
+ gotAMessage = true;
+ }
+
+ // read the bytes incoming from the client:
+ char thisChar = client.read();
+ // echo the bytes back to the client:
+ server.write(thisChar);
+ // echo the bytes to the server as well:
+ Serial.print(thisChar);
+ }
+}
\ No newline at end of file |