Berkeley DB 4.8 with rust build script for linux.

1 files changed, 109 insertions, 0 deletions

diff --git a/db-4.8.30/test/repmgr023.tcl b/db-4.8.30/test/repmgr023.tcl
new file mode 100644
index 0000000..c47aa86
--- /dev/null
+++ b/db-4.8.30/test/repmgr023.tcl
@@ -0,0 +1,109 @@
+# See the file LICENSE for redistribution information.
+#
+# Copyright (c)-2009 Oracle.  All rights reserved.
+#
+# TEST repmgr023
+# TEST Repmgr support for multi-process master.
+# TEST
+# TEST Start two processes at the master.
+# TEST Add a client site (not previously known to the master 
+# TEST processes), and make sure
+# TEST both master processes connect to it.
+
+proc repmgr023 {  } {
+	source ./include.tcl
+
+	set tnum "023"
+	puts "Repmgr$tnum: Two master processes both connect to a client."
+	set site_prog [setup_site_prog]
+
+	env_cleanup $testdir
+
+	set masterdir $testdir/MASTERDIR
+	set clientdir $testdir/CLIENTDIR
+
+	file mkdir $masterdir
+	file mkdir $clientdir
+
+	set ports [available_ports 2]
+	set master_port [lindex $ports 0]
+	set client_port [lindex $ports 1]
+
+	puts "\tRepmgr$tnum.a: Set up the master (on TCP port $master_port)."
+	set master [open "| $site_prog" "r+"]
+	fconfigure $master -buffering line
+	puts $master "home $masterdir"
+	puts $master "local $master_port"
+	make_dbconfig $masterdir {{rep_set_nsites 3}}
+	puts $master "output $testdir/m1output"
+	puts $master "open_env"
+	puts $master "start master"
+	set ignored [gets $master]
+	puts $master "open_db test.db"
+	puts $master "put myKey myValue"
+
+	# sync.
+	puts $master "echo setup"
+	set sentinel [gets $master]
+	error_check_good echo_setup $sentinel "setup"
+	
+	puts "\tRepmgr$tnum.b: Start a second process at master."
+	set m2 [open "| $site_prog" "r+"]
+	fconfigure $m2 -buffering line
+	puts $m2 "home $masterdir"
+	puts $m2 "output $testdir/m2output"
+	puts $m2 "open_env"
+	puts $m2 "open_db test.db"
+	puts $m2 "put sub1 abc"
+	puts $m2 "echo firstputted"
+	set sentinel [gets $m2]
+	error_check_good m2_firstputted $sentinel "firstputted"
+
+	puts "\tRepmgr$tnum.c: Set up the client (on TCP port $client_port)."
+	set client [open "| $site_prog" "r+"]
+	fconfigure $client -buffering line
+	puts $client "home $clientdir"
+	puts $client "local $client_port"
+	make_dbconfig $clientdir {{rep_set_nsites 3}}
+	puts $client "output $testdir/coutput"
+	puts $client "open_env"
+	puts $client "remote localhost $master_port"
+	puts $client "start client"
+	error_check_match start_client [gets $client] "*Successful*"
+
+	puts "\tRepmgr$tnum.d: Wait for STARTUPDONE."
+	set clientenv [berkdb_env -home $clientdir]
+	await_startup_done $clientenv
+	  
+	# Initially there should be no rerequests.
+	set pfs1 [stat_field $clientenv rep_stat "Log records requested"]
+	error_check_good rerequest_count $pfs1 0
+
+	puts $m2 "put sub2 xyz"
+	puts $m2 "put sub3 ijk"
+	puts $m2 "put sub4 pqr"
+	puts $m2 "echo putted"
+	set sentinel [gets $m2]
+	error_check_good m2_putted $sentinel "putted"
+	puts $master "put another record"
+	puts $master "put and again"
+	puts $master "echo m1putted"
+	set sentinel [gets $master]
+	error_check_good m1_putted $sentinel "m1putted"
+
+	puts "\tRepmgr$tnum.e: Check that replicated data is visible at client."
+	puts $client "open_db test.db"
+	set expected {{myKey myValue} {sub1 abc} {sub2 xyz} {another record}}
+	verify_client_data $clientenv test.db $expected
+
+	# make sure there weren't too many rerequests
+	puts "\tRepmgr$tnum.f: Check rerequest stats"
+	set pfs [stat_field $clientenv rep_stat "Log records requested"]
+	error_check_good rerequest_count [expr $pfs <= 1] 1
+
+	puts "\tRepmgr$tnum.g: Clean up."
+	$clientenv close
+	close $client
+	close $master
+	close $m2
+}