From fc944ff979dbbd49a57722fe2d1d2acf47312eb4 Mon Sep 17 00:00:00 2001 From: Jesse Morgan Date: Thu, 20 Oct 2011 22:16:19 -0700 Subject: Inital commit... halfway through the project --- libraries/Stepper/examples/MotorKnob/MotorKnob.pde | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 libraries/Stepper/examples/MotorKnob/MotorKnob.pde (limited to 'libraries/Stepper/examples/MotorKnob/MotorKnob.pde') diff --git a/libraries/Stepper/examples/MotorKnob/MotorKnob.pde b/libraries/Stepper/examples/MotorKnob/MotorKnob.pde new file mode 100644 index 0000000..f4d63e1 --- /dev/null +++ b/libraries/Stepper/examples/MotorKnob/MotorKnob.pde @@ -0,0 +1,41 @@ +/* + * MotorKnob + * + * A stepper motor follows the turns of a potentiometer + * (or other sensor) on analog input 0. + * + * http://www.arduino.cc/en/Reference/Stepper + * This example code is in the public domain. + */ + +#include + +// change this to the number of steps on your motor +#define STEPS 100 + +// create an instance of the stepper class, specifying +// the number of steps of the motor and the pins it's +// attached to +Stepper stepper(STEPS, 8, 9, 10, 11); + +// the previous reading from the analog input +int previous = 0; + +void setup() +{ + // set the speed of the motor to 30 RPMs + stepper.setSpeed(30); +} + +void loop() +{ + // get the sensor value + int val = analogRead(0); + + // move a number of steps equal to the change in the + // sensor reading + stepper.step(val - previous); + + // remember the previous value of the sensor + previous = val; +} \ No newline at end of file -- cgit v1.2.3