From fc944ff979dbbd49a57722fe2d1d2acf47312eb4 Mon Sep 17 00:00:00 2001
From: Jesse Morgan <jesse@jesterpm.net>
Date: Thu, 20 Oct 2011 22:16:19 -0700
Subject: Inital commit... halfway through the project

---
 .../examples/HelloWorld/HelloWorld.pde             | 58 ++++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 libraries/LiquidCrystal/examples/HelloWorld/HelloWorld.pde

(limited to 'libraries/LiquidCrystal/examples/HelloWorld/HelloWorld.pde')

diff --git a/libraries/LiquidCrystal/examples/HelloWorld/HelloWorld.pde b/libraries/LiquidCrystal/examples/HelloWorld/HelloWorld.pde
new file mode 100644
index 0000000..358f8f8
--- /dev/null
+++ b/libraries/LiquidCrystal/examples/HelloWorld/HelloWorld.pde
@@ -0,0 +1,58 @@
+/*
+  LiquidCrystal Library - Hello World
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch prints "Hello World!" to the LCD
+ and shows the time.
+ 
+  The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * LCD R/W pin to ground
+ * 10K resistor:
+ * ends to +5V and ground
+ * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe
+ modified 22 Nov 2010
+ by Tom Igoe
+ 
+ This example code is in the public domain.
+
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+void setup() {
+  // set up the LCD's number of columns and rows: 
+  lcd.begin(16, 2);
+  // Print a message to the LCD.
+  lcd.print("hello, world!");
+}
+
+void loop() {
+  // set the cursor to column 0, line 1
+  // (note: line 1 is the second row, since counting begins with 0):
+  lcd.setCursor(0, 1);
+  // print the number of seconds since reset:
+  lcd.print(millis()/1000);
+}
+
-- 
cgit v1.2.3