From fc944ff979dbbd49a57722fe2d1d2acf47312eb4 Mon Sep 17 00:00:00 2001 From: Jesse Morgan Date: Thu, 20 Oct 2011 22:16:19 -0700 Subject: Inital commit... halfway through the project --- .../Ethernet/examples/WebClient/WebClient.pde | 71 ++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 libraries/Ethernet/examples/WebClient/WebClient.pde (limited to 'libraries/Ethernet/examples/WebClient') diff --git a/libraries/Ethernet/examples/WebClient/WebClient.pde b/libraries/Ethernet/examples/WebClient/WebClient.pde new file mode 100644 index 0000000..355d746 --- /dev/null +++ b/libraries/Ethernet/examples/WebClient/WebClient.pde @@ -0,0 +1,71 @@ +/* + Web client + + This sketch connects to a website (http://www.google.com) + using an Arduino Wiznet Ethernet shield. + + Circuit: + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 18 Dec 2009 + by David A. Mellis + + */ + +#include +#include + +// Enter a MAC address and IP address for your controller below. +// The IP address will be dependent on your local network: +byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; +byte ip[] = { 192,168,1,177 }; +byte server[] = { 173,194,33,104 }; // Google + +// Initialize the Ethernet client library +// with the IP address and port of the server +// that you want to connect to (port 80 is default for HTTP): +Client client(server, 80); + +void setup() { + // start the Ethernet connection: + Ethernet.begin(mac, ip); + // start the serial library: + Serial.begin(9600); + // give the Ethernet shield a second to initialize: + delay(1000); + Serial.println("connecting..."); + + // if you get a connection, report back via serial: + if (client.connect()) { + Serial.println("connected"); + // Make a HTTP request: + client.println("GET /search?q=arduino HTTP/1.0"); + client.println(); + } + else { + // kf you didn't get a connection to the server: + Serial.println("connection failed"); + } +} + +void loop() +{ + // if there are incoming bytes available + // from the server, read them and print them: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if the server's disconnected, stop the client: + if (!client.connected()) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + + // do nothing forevermore: + for(;;) + ; + } +} + -- cgit v1.2.3